Skip to content

Texas Contractor Insurance Requirements by License and City

Texas has no state general contractor license, so insurance minimums come from trade licenses and cities: $300,000/$600,000 for electricians and Class A HVAC, $300,000 for plumbers.

6 minute read

A kitchen stripped back during a renovation, where a renovation policy covers the existing building and the new work

Reviewed by Licensed P&C brokerPublished

Shopping for General Liability Insurance? Start a quote in a few minutes


Texas doesn't license general contractors at the state level, so no single statewide rule sets a general contractor's insurance. The City of Austin says it directly: "In Texas, anyone can be a General Contractor, including homeowners, and a state license is not required."[1] Insurance requirements come from three other places: the state trade license (electrical, air conditioning, plumbing), the city where you pull the permit, and the contract. The state minimums run from $100,000 to $300,000 per occurrence of general liability.[2][3][4]

This guide is for a Texas general contractor, remodeler or trade contractor who needs to know what to carry before bidding or pulling a permit. Our Texas general liability page shows the insurers we shop in Texas today.

What do the Texas trade licenses require?

Each licensing agency publishes its own minimum, and each takes a certificate of insurance as proof.

LicenseAgencyMinimum liability insurance
Electrical contractorTDLR$300,000 per occurrence (bodily injury and property damage combined), $600,000 aggregate, $300,000 products and completed operations aggregate[2]
Air conditioning and refrigeration contractor, Class ATDLR$300,000 per occurrence, $600,000 aggregate, $300,000 products and completed operations aggregate[3]
Air conditioning and refrigeration contractor, Class BTDLR$100,000 per occurrence, $200,000 aggregate, $100,000 products and completed operations aggregate[3]
Responsible Master PlumberTSBPE$300,000 of commercial liability insurance[4]

Three details in the fine print:

  • The coverage has to stay in force. An air conditioning contractor "must maintain commercial general liability insurance at all times" while the license is active, from an insurer authorized to sell liability insurance in Texas.[3]
  • The class decides the limit. A Class A air conditioning license covers any size unit. Class B covers cooling systems of 25 tons and under and heating systems of 1.5 million BTUs per hour and under.[3]
  • A plumber's limit follows the Responsible Master Plumber. That person is responsible for work done under the license whether employees or subcontractors perform it, and keeping at least $300,000 of general commercial liability insurance is part of that duty.[4]

What do Texas cities require?

It depends on the city, so check where the permit will be pulled. Two examples show the range.

Austin registers general contractors once, before a building permit is activated, and says general contractors need not renew annually "since a license is not required." Mechanical, electrical and plumbing contractors register with their state license, and the city takes license renewals and insurance updates for those registrations.[1]

San Antonio sets liability minimums for its own registrations, with the City named as certificate holder. A home improvement contractor needs $300,000 per occurrence, $600,000 aggregate and $300,000 for products and completed operations. A residential building contractor needs $500,000 per occurrence, $1,000,000 aggregate and $500,000 for products and completed operations.[5]

Do Texas contractors need workers' compensation?

For private work, it's the employer's choice. TDI says private employers "can choose to carry workers' compensation insurance coverage," and that employers who choose not to must notify their employees and the Division of Workers' Compensation.[6] The electrical contractor application reflects that choice: it takes proof of workers' compensation, a certificate of authority to self-insure, or a statement that you elected not to carry it, with a notice of no coverage filed with TDI.[2]

Public work is different. On a building or construction project for a governmental entity, "each person working on this site or providing services related to this construction project must be covered by workers' compensation insurance," including people hauling or delivering equipment and materials, "regardless of the identity of their employer or status as an employee." The contractor must post that notice on each project site.[7] If you bid public jobs, you and every subcontractor need a policy. Our Texas workers' compensation page covers the non-subscriber rules.

What will the contract ask for?

Usually more than any license. Owners and general contractors commonly ask for a certificate of insurance, their name as an additional insured, and limits above the state minimums. Read the insurance article of the contract before you price the job. Our guides to the certificate of insurance and additional insured endorsements explain what those requests mean.

General liability is only one policy on a job. The structure under construction goes on builders risk, and trucks go on commercial auto, where a vehicle over 26,000 pounds brings its own state minimum.

Does it matter which insurer writes the policy?

For the air conditioning license, the insurer must be authorized to sell liability insurance in Texas.[3] Cost is the other difference: a policy placed with a surplus lines insurer for a Texas insured carries a state tax of 4.85% of taxable premiums on top of the premium.[8]

To compare prices, have your license class, payroll, revenue, the share of work you subcontract and the limits your contracts require, then start a general liability quote.

Frequently asked questions

Does Texas require general contractors to carry general liability insurance?

Not by a statewide license, because Texas has no state general contractor license.[1] A city registration or a contract can require it. San Antonio, for example, sets liability minimums for home improvement and residential building contractors.[5]

How much liability insurance does a Texas electrical contractor need?

At least $300,000 per occurrence, $600,000 aggregate and $300,000 aggregate for products and completed operations, shown on TDLR's certificate of insurance form.[2]

What is the difference between Class A and Class B for insurance?

Class A air conditioning contractors must carry $300,000/$600,000/$300,000. Class B contractors, limited to smaller systems, must carry $100,000/$200,000/$100,000.[3]

Can a Texas contractor go without workers' comp?

On private work, yes, with notice to employees and to the Division of Workers' Compensation.[6] On a government building or construction project, no: everyone providing services on the project must be covered.[7]

Do I need a new certificate for every city?

Often. San Antonio asks for a certificate that lists the City as certificate holder, and other cities have their own registration steps.[5]

This guide is for educational purposes. It summarizes the Texas Department of Licensing and Regulation's electrical and air conditioning contractor pages, the Texas State Board of Plumbing Examiners' Responsible Master Plumber page, the Austin and San Antonio contractor registration pages, TDI's workers' compensation pages and the Texas Comptroller's surplus lines tax page, all read on November 19, 2026. City rules change, and other cities have their own. Your policy's terms, conditions and endorsements control. Menlo Insurance Services is a licensed property and casualty agency in Texas that may earn a commission on a placement.

The Bottom Line

In Texas, start with your license and your city. Electrical and Class A air conditioning contractors need $300,000/$600,000/$300,000, plumbers need $300,000 under their Responsible Master Plumber, and cities such as San Antonio add their own minimums for builders and remodelers.[2][3][4][5] Workers' compensation is your choice on private jobs and mandatory on public ones.[6][7] Then read the contract, because it usually asks for more.

References

  1. 1.City of Austin, Development Services Department. “Contractor Registration.” Accessed 2026-11-19. https://www.austintexas.gov/development-services/contractor-registration ↩
  2. 2.Texas Department of Licensing and Regulation. “Apply for a New Electrical Contractor License.” Accessed 2026-11-19. https://www.tdlr.texas.gov/electricians/apply/businesses/contractor-elec.htm ↩
  3. 3.Texas Department of Licensing and Regulation. “Apply for an Air Conditioning and Refrigeration Contractor License.” Accessed 2026-11-19. https://www.tdlr.texas.gov/acr/contractor-apply.htm ↩
  4. 4.Texas State Board of Plumbing Examiners. “Responsible Master Plumber.” Accessed 2026-11-19. https://tsbpe.texas.gov/responsible-master-plumber/ ↩
  5. 5.City of San Antonio, Development Services Department. “Building & Home Improvement.” Accessed 2026-11-19. https://www.sa.gov/Directory/Departments/DSD/Contractor/Building-Home-Improvement ↩
  6. 6.Texas Department of Insurance, Division of Workers' Compensation. “Workers' compensation insurance coverage verification.” Accessed 2026-11-19. https://www.tdi.texas.gov/wc/employer/coverage.html ↩
  7. 7.Texas Department of Insurance, Division of Workers' Compensation. “Notice 8, Required Workers' Compensation Coverage (Rule 110.110, rev. 12/15).” Accessed 2026-11-19. https://www.tdi.texas.gov/forms/dwc/notice8.pdf ↩
  8. 8.Texas Comptroller of Public Accounts. “Surplus Lines Insurance Premium Tax.” Accessed 2026-11-19. https://comptroller.texas.gov/taxes/insurance/surplus-lines.php ↩

Compare General Liability Insurance quotes

Related Articles

ConstructionBuilders Risk Insurance in Texas: Coastal Wind, Hail and Renovations
Insurance BasicsCertificate of Insurance (COI): What It Proves
General LiabilityAdditional Insured Endorsements, Explained